Documentation
Certificates of analysis
Analytical records by batch, grouped by product category. Open a product to see every lot on file — including superseded ones — with the figures reported by the issuing laboratory and a link to the certificate itself.
Sample data — no certificates published yet
Every row below is layout scaffolding. No laboratory produced these figures, the batch numbers are not real lots, and no certificate files are linked. Replace them with transcriptions of your own certificates before this page goes live.
- Certificates
- 9
- Strengths covered
- 8
- Most recent test
- Sep 8, 2026
- Awaiting a COA
- 6
Showing 9 of 9 certificates
Peptide
2 productsPeptide Blend
3 productsResearch Compound
1 productReagent
1 productAwaiting a certificate
These strengths have no certificate published yet. They are listed here rather than left off the page so the gap is visible.
How to read these certificates
What a certificate of analysis is
A certificate of analysis is the issuing laboratory's report on a sample drawn from a single lot, on a single date, against the parameters that laboratory tested. It describes that sample and nothing else. It is not a guarantee of the properties of any other lot, it does not establish that a material is suitable for any particular research application, and it is not a representation that a material is safe for any use outside a laboratory.
Match the batch number on the certificate to the batch number printed on the container in front of you. If the two do not match, the certificate does not describe what you are holding. Purchasers remain responsible for confirming identity, purity, and fitness for their own protocols.
How to read each field
- Batch # — the lot identifier as printed on the container label.
- Tested — the date the issuing laboratory completed its analysis, not the date of manufacture or the date of publication.
- Label claim — the quantity stated on the label for that lot.
- Samples assayed — how many individual units were drawn from the lot and tested.
- Avg. net content — the measured mean across those units. It will not match the label claim exactly; overfill is normal, and the figure is reported as measured rather than rounded to the claim.
- Purity — chromatographic purity of the tested sample, as reported by the laboratory.
- Endotoxins, heavy metals, sterility — pass or fail against the acceptance criteria stated on the certificate. A dash means that assay was not performed for that lot, and must not be read as a pass.
Superseded lots
A lot marked superseded has been replaced in the catalog by a newer one. It is kept on this page on purpose: anyone still holding a container from an earlier lot needs its record, and removing it would make that record unavailable at exactly the moment it matters. Superseded indicates only that a newer lot exists — it is not a withdrawal, and it does not indicate a problem with the earlier lot.
Independent testing
Analytical testing is performed by laboratories independent of Pioneer Labs USA LLC, and the issuing laboratory is named on each certificate. Figures shown in the tables on this page are transcribed from those certificates for browsing; where a figure here differs from the certificate, the certificate governs.
Availability of documentation varies by material and by lot. Where no certificate is published for a lot, none should be assumed. Catalog items with no certificate yet published are listed at the foot of this page rather than omitted from it.
Questions about a specific lot are handled through the compliance center. These records sit alongside the RUO disclaimer, which governs every listing and document on this site.
Research use only. Not for human consumption.
